somethink
Results 1 to 1 of 1

Thread: Tornado Infra Pro Station - Bigger Heaters for faster and safer reworking!!!

  1. #1
    Moderator
    Join Date: Apr 2011 Member: 72969 Status: Offline Posts: 961
    Thanks Meter: 12

    Tornado Infra Pro Station - Bigger Heaters for faster and safer reworking!!!

    Tornado Infra Pro Rework Station - now with bigger preheaters for FASTER and SAFER reworking!



    ---Best for Big BGA IC's such as laptop motherboards, PC motherboards, xbox360, PS3 and many other gaming consoles ---


    SPECIFICATIONS:

    Preheater:
    Heating element surface : 122 x 122mm
    LxWxH : 28cmx25x8 cm
    Voltage input : 220V

    Upper Heater and Power supply unit (PSU):
    Heating element surface : 60 x 60mm
    Heating element length ( 25cm)
    PSU (Power supply unit) : 15x10x10cm
    PSU voltage input : 220V

    Stand:
    Height : 33cm
    Base : 25x16cm

    WORKING PRINCIPLE:

    Preheater is used to preheat the PCB from the bottom side at around 100 degree Celsius at the start of the reworking process, this is a must on lead free PCB's.

    Upper Heater is used to reflow from above the BGA IC at around 225 degree Celsius (lead free) and 180 degree Celsius (non-lead free pcb) during the reworking procedure.

    Stand is used to hold the upper heater for steady and safe reworking.

    Thermometer is used to measure the temperature of the PCB and its reworked area during the reworking process, to monitor its temperature.


    Youtube Videos :

    [Login or Register to see links. Click Here To Register]
    [Login or Register to see links. Click Here To Register]

    Heaters are imported from Germany - known to be best heater producers


    For more info, check:
    [Login or Register to see links. Click Here To Register]

  2. The Following User Says Thank You to gsm-khatni For This Useful Post:

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts