Micro-box LG3G, BB, HTC, SAGEM driver win7 FAQ - Dhaka Mobile
 
Dhaka Mobile

Go Back   Dhaka Mobile > Product Support Sections > Hardware & SoftwareProducts (official support) > Micro-Box Team Products > Activation Software Support
Activation Software Support Activation Software Support (LG3G, BB, HTC, SAGEM) support forum
Forums by Category
Closed Thread
 
Thread Tools Search this Thread Display Modes
Old 06-29-2013, 08:26   #1
M.Irfan
Top Contributor
 
M.Irfan's Avatar
 
Join Date: Sep 2010
Posts: 6,749
Status: Offline
Thanks: 5
Thanked 184 Times in 152 Posts
Rep Power: 14
M.Irfan is on a distinguished road

Micro-box LG3G, BB, HTC, SAGEM driver win7 FAQ


Q: How to Enter Unlock Codes on BlackBerry ?
A:

How to Enter Unlock Codes on BlackBerry 8700/8700c/8700g/9000 :

Note: SIM is REQUIRED to unlock the phone. SIM card can be inactive, doesn’t need to active. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.

1. Power on
2. Go to Settings
3. Go to Options
4. Go to Advanced Options
5. Go to Sim Card
6. HOLD ALT and press: M E P E (Please note that you will NOT see what you type on the screen)
7. It will ask you for the unlock code. Enter it and then press jog dial to confirm and your phone is unlocked!

How to Enter Unlock Codes on BlackBerry Storm

1. Insert any sim card
2. Turn off all of the wireless connections
3. Go to Options
4. Select Advanced Options
5. Select SIM Card
6. Hit menu select show keyboard
7. Enter mepd (you will not be able to see the typed info)
8. Enter mep2
9. Now it will say enter network mep code

How to Enter Unlock Codes on BlackBerry 8800, 8820, 8300, 8310 and 8320 :

Note: NO SIM is needed to unlock the phone. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.

1. Power on
2. Go to Settings
3. Go to Options
4. Go to Advanced Options
5. Go to Sim Card
6. HOLD ALT and press: M E P 2 (Please note that you will NOT see what you type on the screen)
7. It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!

How to Enter Unlock Codes on BlackBerry Pearl (8100, 8110, 8120) :

Note: Remove any SIM that is currently in the phone. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.

1. Power on
2. Go to Settings
3. Go to Options
4. Go to Advanced Options
5. Go to Sim Card
6. HOLD ALT (Left side Below @) and press: M E P P 2 (Please note that you will NOT see what you type on the screen)
7. It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!

How to Enter Unlock Codes on BlackBerry 7100/7130 :

Note: Must be done WITHOUT a SIM card inserted and wireless radio must be turned off. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.

1. Power on
2. On the Home screen, click the Tools icon. The Options screen appears.
3. In the tools screen, select the Settings icon.
4. Scroll to SIM Card and select it. You should see the phone number and the SIM ID number.
5. Type ‘mepp2' to display the dialog box asking for the unlock code (Press the Alt + 2 key to get the number 2) ( you will not see text appear on screen while typing )
6. It will ask you for the unlock code. Enter it and then press jog dial once to confirm and your phone is unlocked!

How to Enter Unlock Codes on BlackBerry 5xxx, 6xxx, 7xxx (Except for 7100) :

Note: After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.

1. Power on
2. Go to Options.
3. Scroll to SIM CARD then press jog dial in once to select it
4. HOLD ALT (Half moon key on the lower left side) and press: M E P E (Please note that you will NOT see what you type on the screen)
5. It will ask you for the unlock code. Enter it and then press jog dial once to confirm and your phone is unlocked!

Model : BlackBerry 8100 (Vodafone Australia)

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE YOU ATTEMPT ANY UNLOCK PROCESS

This procedure unlocks the handset from being network restricted from only using SIM cards from Vodafone Australia. In case of difficulties, please refer to the FAQ listed below

1. Take note of the unlocking code shown above

2. Insert a Non-Vodafone Australia working SIM card.

3. Ensure the phone is charged and then switch the phone on.

4. Optional Step: If the SIM card has a PIN, enter your PIN number. (See FAQ below)

5. The phone will then display a message. The most common is “Invalid SIM card”. (Different message? See FAQ below)

6. Select “Turn Wireless Off”

7. Select “Settings” Menu , then go to Advanced Options > SIM Card

8. Type alt-MEPT by holding the ALT-key and typing the letters MEPT with multitap i.e. type hold ALT, type {M}{ER}{OP}{OP}{TY}

9. When prompted with “Enter Network MEP code (255 left)” on the screen, enter the 16-digit network unlock code provided for your phone, then press Enter. (Unlocking code is shown above)

10. Reset the phone by pulling the battery

11. Switch the phone on and the handset will be unlocked automatically. This will be confirmed if you can make and receive calls with the Non-Vodafone Australia SIM card. (You will need reception and phone credit with the different network provider)

Please Note:

If the unlocking code is entered incorrectly the next attempt to unlock the device will be delayed for 10 seconds increments. The number of unlocking attempts is limited to 255 tries only. When 255 attempts is reached the phone will be permanently blocked.

To unblock the phone, it must be taken to a RIM service center. No outgoing calls including emergency call is possible when the phone is blocked.


( Thx to Souhail_gsm )

__________________
Br,
M.Irfan
Dhaka Mobile Team
 
Old 06-29-2013, 08:26   #2
M.Irfan
Top Contributor
 
M.Irfan's Avatar
 
Join Date: Sep 2010
Posts: 6,749
Status: Offline
Thanks: 5
Thanked 184 Times in 152 Posts
Rep Power: 14
M.Irfan is on a distinguished road
done by julvir

BR
















---------
Ths PDF version :

http://www.micro-box.com/images/win7...win7_32bit.pdf

all work done by julvir
__________________
Br,
M.Irfan
Dhaka Mobile Team
 
Old 06-29-2013, 08:26   #3
M.Irfan
Top Contributor
 
M.Irfan's Avatar
 
Join Date: Sep 2010
Posts: 6,749
Status: Offline
Thanks: 5
Thanked 184 Times in 152 Posts
Rep Power: 14
M.Irfan is on a distinguished road
Q: it's my first HTC !!what can i do to unlock it ?


A: 1.First Step to unlock HTC mobile you need to downloadActive Sync:

Download Microsoft ActiveSync 4.5 | Synchronizing | Windows Mobile
__________________
Br,
M.Irfan
Dhaka Mobile Team
 
Old 06-29-2013, 08:26   #4
M.Irfan
Top Contributor
 
M.Irfan's Avatar
 
Join Date: Sep 2010
Posts: 6,749
Status: Offline
Thanks: 5
Thanked 184 Times in 152 Posts
Rep Power: 14
M.Irfan is on a distinguished road
How to make a screen capture to help Microbox user ?

use the Print Screen key+ALT to obtain Screen Captures. as foto



after that go to Paint do CTRL+V ( paste ) save picture , use extension use JPEG PNG or GIF
__________________
Br,
M.Irfan
Dhaka Mobile Team
 
Old 06-29-2013, 08:26   #5
M.Irfan
Top Contributor
 
M.Irfan's Avatar
 
Join Date: Sep 2010
Posts: 6,749
Status: Offline
Thanks: 5
Thanked 184 Times in 152 Posts
Rep Power: 14
M.Irfan is on a distinguished road
How to upload picture on Forum ?

you can, use many server to upload , like this one

Hébergement d'image - Upload

just watch video easy to do

Hotfile.com: One click file hosting: Capture.rar
__________________
Br,
M.Irfan
Dhaka Mobile Team
 
Old 06-29-2013, 08:27   #6
M.Irfan
Top Contributor
 
M.Irfan's Avatar
 
Join Date: Sep 2010
Posts: 6,749
Status: Offline
Thanks: 5
Thanked 184 Times in 152 Posts
Rep Power: 14
M.Irfan is on a distinguished road
Disable Phone code and reset BlackBerry PS: some new BB solution still wanted so i hope soon will be discovered


This soft can be used to Disable Phone reset factory also repair many wrong codes tries " enter network MEP code (0 left ) "


  1. Run ResetMepTool
  2. Connect Black Berry to computer
  3. Wait until it finishes
  4. Try to enter code read by Micro-Box
  5. important enjoy with MicroBox






Also you can use this soft i solve allot problem when i get unlock failure :
BBSAKv1.7_Installer.rar

when soft ask about pass put if if you don't it just clic any thing
click Factory Reset


Download ResetMepTool

http://www.mediafire.com/?54naijoc7id4o1b
__________________
Br,
M.Irfan
Dhaka Mobile Team
 
Collapse Related threads at Dhaka Mobile
Thread Thread Starter Forum Replies Last Post
Sagem w7 USB Cable Pin Out eqra1998 Sagem Hardware Repair Area 0 09-24-2011 19:34
F.A.Q About Sagem rajeshchiyyan Infineon C16X M51 & ARM7 M52 BASED 1 05-23-2011 12:35
Sagem Hardware Helpful-Man Sagem Hardware Repair Area 1 11-15-2010 04:22
Setool LG3G Files MTTECHNOLOGY SonyEricsson Flash Files 0 10-20-2010 09:03
Sagem WENS LINK Sagem Hardware Repair Area 0 10-18-2010 08:28

Closed Thread

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Resource
Service
Company
Clear Default Style - Mobile Style Clear
All times are GMT +1. The time now is 13:35.
Clear

Follow us below -

Copyright ©2010-2018. Dhaka Mobile
Registered trademark of vBulletin Solutions
An DHAKA MOBILE Company