Mobile phone recommendation with RE-7500 - Dhaka Mobile
 
Dhaka Mobile

Go Back   Dhaka Mobile > Hardware Repair > GSM Hardware Equipments
GSM Hardware Equipments All about Hardware Instruments and equipments like Soldering Stations, Hardware Tools, Oscilloscopes , Frequency Counters ..ext!
Forums by Category
 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 04-23-2011, 18:11   #1
gsm-khatni
Moderator
 
Join Date: Apr 2011
Posts: 962
Status: Offline
Thanks: 0
Thanked 12 Times in 11 Posts
Rep Power: 7
gsm-khatni is on a distinguished road

Mobile phone recommendation with RE-7500


RE -7500 Set up for small PCB (source Support of Jovy Systems)

Add-on:-

4 units of small PCB supporters JV-SSU (Why? to make complete close loop for application , and concentrate the heat power without any loss by the main PCB holders)

1 unit of upper heater reflector JV-UR20 (why? to make a window to focus the heating power only for the IC , which is small and have neighbor components)

Fast process to eliminate the heat stress over the PCB:-
  • power the lower heater in fast re-flow and upper in fast re-flow for, it is needed to use the machine in software (you can not heat the upper heater in park mode!) it is take from 3 to 5 minutes , and not include in the process.
  • upper heater level in 2.5 or 2 (in this distance you can not remove or solder any component it is very narrow , you have to keep this in mind)
  • T/C (thermocouple) placed as near as possible to the component, T/C diameter is 1.00mm no much free-space could be suitable, so try to find any metal frame near by the component (temperature tolerance is +5 degrees to be used. (I am using Omega wire thermo couple GG-K-24 with the machine for mobile PCB not the original one tolerance +10 degrees and stick it with kapton tape)
  • machine settings for whole process (it is not a profile or standard process it is Fast process guide line!)
    Upper heater in fast re-flow
    lower heater in preheat
    upper heater level 2.5 (or 2 for faster process , 1 for very fast process and for only small components)
    end temperature for lead free is 220 for Tin/lead is 190 ( yes over 10 degrees than standard) , the Tin/lead temperature guide is for lead free IC re-balled with Tin/lead solder paste.

Please post here your comments after trying with mobile models.
  Reply With Quote
Collapse Related threads at Dhaka Mobile
Thread Thread Starter Forum Replies Last Post
rokea r 7500 flash file 6800h ic 16mb need plse share poran Chinese Flash Files 0 03-30-2013 16:29
Mobile Phone Repair mobilehospitalbd New Members 1 11-04-2012 13:57
How do I know if my mobile phone is locked? sujonbd FAQ (Frequently Asked Questions) 0 09-14-2012 11:50
New Mobile Phone (E77) MTTECHNOLOGY Chinese Models & Cloned Phones 0 02-13-2011 10:23

 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Resource
Service
Company
Clear Default Style - Mobile Style Clear
All times are GMT +1. The time now is 03:25.
Clear

Follow us below -

Copyright ©2010-2017. Dhaka Mobile
Registered trademark of vBulletin Solutions
An DHAKA MOBILE Company