Solution of identify nokia phone shorting - Page 4 - Dhaka Mobile
 
Dhaka Mobile

Go Back   Dhaka Mobile > Mobile Phone Brands -=Hardware & Software Area=- > Nokia > Nokia Base Band - (BB5)
Nokia Base Band - (BB5) Baseband-5 Phones: 2700 Classic , 2730 Classic , 3109c , 3110c , 3120c , 3250 , 3500c , 3600s , 3610 Fold , 3710 Fold , 3720 Classic , 5130 XpressM , 5200 / 5200b , 5220 XpressM , 5230 XpressM , 5300 / 5300b , 5310 / 5310b , 5320 , 5500 , 5530 XpressM , 5610 , 5630 XpressM , 5700 , 5730 XpressM , 5800 , 6085 / 6086 , 6110n , 6120c , 6121c , 6124c , 6125 , 6126 / 6133b , 6131 / 6133 , 6131 (NFC) , 6136 , 6151 , 6208 Classic , 6210n , 6212c , 6220c , 6233 , 6234 , 6260 Slide , 6263 , 6267 , 6270 , 6280 / 6288 , 6282 , 6290 , 6300 , 6300i , 6301 , 6303 Classic , 6500 Classic , 6500 Slide , 6555 , 6600 Fold , 6600 Slide , 6630 , 6650 Fold , 6680 , 6681 , 6682 , 6700 Classic , 6710 Navigator , 6720 Classic , 6730 Classic , 6760 Slide , 6790 Surge , 7210c , 7310c , 7370 , 7373 , 7390 , 7500 , 7510c , 7610c , 7900 , 8600 , 8800 arte , E50 , E51 , E52 , E55 , E60 , E61 , E61i , E62 , E63 , E65 , E66 , E70 , E71 , E72 , E75 , E90 , N70 , N71 , N72 , N73 , N75 , N76 , N77 , N78 , N79, N8, N80 , N81 , N82 , N85 , N86 , N90 , N91 , N92 , N93 , N93i , N95 , N95 8GB , N96 , N97 , N97 Mini, N770, N800, N810, N900, Asha 200, Asha 201, Asha 202, Asha 300, Asha 302, Asha 303, C2-01, C3-00, C3-01, C5-00, C5-03, C5-05, C5-06, C6-00, C6-01, C7-00, C6-01, E5-00, E6, E7-00, E50, E51, E52, E55, E60, E61, E62, E63, E65, E66, E70, E71, E72, E73, E75, E90, X1-00, T7-00, X2-00, X2-01, X5-00, X5-01, X3-00, X3-02, X6-00, X7-00,
Forums by Category
Reply
 
Thread Tools Search this Thread Display Modes
Old 08-10-2012, 16:39   #31
RIB@T
Moderator
 
RIB@T's Avatar
 
Join Date: Aug 2010
Posts: 607
Status: Offline
Thanks: 4
Thanked 29 Times in 22 Posts
Rep Power: 9
RIB@T is on a distinguished road

answer: Solution of identify nokia phone shorting


check shorting in nokia 6670,7610.......



1..remove this coil mark in (1)...if u want to check is pf is short,....


2...remove this coil mark in (2)..if u want to check the display light ic is short....


3..remove ic mark in (3)... this is memory card driver ic this also got +b from batery....remove it to check shoting is gone or not.......


4...remove this transistor ic mark in (4)...this is transistor ic for key pad light ....remove this if u want to check the shoting cause by this transistor....because this transistor got +b from batery......


5..remove this transistor ic mark in (5)...this ic make volt for lcd 2.5v (vlcd)....this ic got +b from batery ....remove this if u want to check the shoting cause by this transistor.....



6...remove boot ic mark in (6)..if u want to check shoting cause by boot ic if it is short replace it with new one......



7..remove ringer ic mark in (7) ....if u want to check shorting throug ringer ic is gone or not...



8.....remove this smps ic mark in (8)... to check the shoting cause by this ic.........this ic make v corea volt for upp...



9..at end remove uem to check shoting is gone or not.....


all the component which are mark in pink colur these all are coils and resistance these are place in series and +b of batery is gone throw them so if u remove the coil and resistance u not have to remove ic to check the shorting in pcb it save time and ur ic ....


  Reply With Quote
Old 08-10-2012, 16:43   #32
RIB@T
Moderator
 
RIB@T's Avatar
 
Join Date: Aug 2010
Posts: 607
Status: Offline
Thanks: 4
Thanked 29 Times in 22 Posts
Rep Power: 9
RIB@T is on a distinguished road

answer: Solution of identify nokia phone shorting


check shoting in nokia 1680-c...


1...remove this coil mark in (1)..if u want to check the light ic is short....


2..remove this v.camdig ic n3301 mark in (2)..if u want to check the v.camdig maker ic ..this v.camdig maker ic got +b from batery....to make v,cam for camera.....



3..remove ringer ic mark in (3)..if u want to check shoting remove it and check if shoting is gone replace it because ringer ic also got +b volt from battery....


4..remove the pf n7700 mark in (4)...if u want to check is pf is short remove it and check shoting...if it is shot then replace it...


5..at end check the power ic and reemove it to check shoting is there or not..

all the component which are mark in pink colur these all are coils these are place in series and +b of batery is gone throw them so if u remove the coil u not have to remove ic to check the shorting in pcb it save time and ur ic ....

  Reply With Quote
Old 08-10-2012, 16:48   #33
RIB@T
Moderator
 
RIB@T's Avatar
 
Join Date: Aug 2010
Posts: 607
Status: Offline
Thanks: 4
Thanked 29 Times in 22 Posts
Rep Power: 9
RIB@T is on a distinguished road

answer: Solution of identify nokia phone shorting


check shoting in nokia 6600 slide....


1..remove these both coil mark in (1)..if u want to check rf ic is short because rf ic also got +b volt from battery....


2...remove these both COIL mark in (2) if u want to check the shoting of pf .......remove the coil and ur shoting is gone then there is shoting in ur pf .......this pf is only used in this circuit for tranmiting signal...(in tx section we say)


3...remove this COIL mark in (3) if u want to check the shoting of pf .......remove the coil and ur shoting is gone then there is shoting in ur pf .......this pf is work for both reciving and transmiting of signal..(this work as antena switch and pf as example in nokia 1110..)


4..remove this coil L3301 mark in (4) if u want to check the shoting cause by n3301,n3302,n3303.....these ic make volt for camera ic ...these ic got +b from batery ...so remove this coil to check shoting is gone or not ..


5..remove this light ic mark in (5)..if u want to check the light ic for display is short....


6..remove ic mark in (6)... this is memory card driver ic this also got +b from batery....remove it to check shoting is gone or not.......


7...remove bluetooth module mark in (7)..if u want to check blutooth ic is short because bluetooth ic also got +b volt from battery....


8..remove this ic mark in (8)..if u want to check the shorting cause flash light driver ic ....because this ic got +b from batery....



9...remove this ic mark in (9)..if u want to check the key boad light ic is short....


10...remove this resistance mark in (10)...if u want to check the ic which are place for controlloing and switching usb charging for the phone these ic are (n2006,n2005)...these ic got +b from batery to work...


11...remove this coil mark in (11)...if u want to check n2001 ic ...this ic is for usb controlling......this ic got +b from batery...


12...remove this ic n2002 mark in (12)...if u want to check this ic ....this ic also for usb controlling......remove this ic because this ic got +b from batery....


13...remove this ic n2000 mark in (13)...if u want to check this ic ....this ic is for controlling usb charging......remove this ic because this ic got +b from batery....


14...at end remove avilma and bety ic to check shoting is gone or not,.......


all the component which are mark in pink colur these all are coils and resistance these are place in series and +b of batery is gone throw them so if u remove the coil and resistance u not have to remove ic to check the shorting in pcb it save time and ur ic ...



  Reply With Quote
Old 08-10-2012, 16:49   #34
RIB@T
Moderator
 
RIB@T's Avatar
 
Join Date: Aug 2010
Posts: 607
Status: Offline
Thanks: 4
Thanked 29 Times in 22 Posts
Rep Power: 9
RIB@T is on a distinguished road

answer: Solution of identify nokia phone shorting


nokia 6120c short
remove these 2 parts mark in picture






  Reply With Quote
Old 08-10-2012, 16:57   #35
RIB@T
Moderator
 
RIB@T's Avatar
 
Join Date: Aug 2010
Posts: 607
Status: Offline
Thanks: 4
Thanked 29 Times in 22 Posts
Rep Power: 9
RIB@T is on a distinguished road

answer: Solution of identify nokia phone shorting


check shoting in nokia 1680 classic.....

1..remove this coil mark in (1)..if u want to check the light ic is short....

2..remove this v.camdig ic n3301 mark in (2)..if u want to check the v.camdig maker ic ..this v.camdig maker ic got +b from batery....to make v,cam for camera.....


3..remove ringer ic mark in (3)..if u want to check shoting remove it and check if shoting is gone replace it because ringer ic also got +b volt from battery....


4..remove the pf n7700 mark in (4)...if u want to check is pf is short remove it and check shoting...if it is shot then replace it...


5.. check vibrator it also got +b...remove it to check shoting....


6..at end check the power ic and remove it to check shoting is there or not...


all the component which are mark in pink colur these all are coils these are place in series and +b of batery is gone throw them so if u remove the coil u not have to remove ic to check the shorting in pcb it save time and ur ic ....

  Reply With Quote
Old 08-10-2012, 17:06   #36
RIB@T
Moderator
 
RIB@T's Avatar
 
Join Date: Aug 2010
Posts: 607
Status: Offline
Thanks: 4
Thanked 29 Times in 22 Posts
Rep Power: 9
RIB@T is on a distinguished road

answer: Solution of identify nokia phone shorting


Check shorting in nokia 7210s..rm436


1..Remove this coil mark in (1)..if u want to check the light ic N2301 is short....

2..Remove this coil mark in (2)..if u want to check blutooth & radio ic N6000 is short because this ic also got +b volt from battery....

3..Remove this coil mark in (3)..if u want to check ringer ic N2151 because ringer ic also got +b volt from battery...

4..Remove this coil mark in (4)..if u want to check the handfree ic N2000 because this ic also got +b volt from battery...

5..Remove N1001 mark in (5) ..if u want to check it ..this is rf ic based on new tecknology ...this ic got +b from batery ic ... this ic work for network...

6..Remove this coil mark in (6)...if u want to check the pf N1002 this pf based on new tecknology... this this ic got +b from batery ic ... this ic work for network...

7..Remove N3200 ic mark in (7) ...this is memory card driver ic .remove it to check shoting is gone or not....

at end remove betty and avilma ic to check shoting is gone or not........

all the component which are mark in pink colur these all are coils and resistance these are place in series and +b of batery is gone throw them so if u remove the coil and resistance u not have to remove ic to check the shorting in pcb it save time and ur ic ....






  Reply With Quote
Old 08-10-2012, 17:31   #37
RIB@T
Moderator
 
RIB@T's Avatar
 
Join Date: Aug 2010
Posts: 607
Status: Offline
Thanks: 4
Thanked 29 Times in 22 Posts
Rep Power: 9
RIB@T is on a distinguished road

answer: Solution of identify nokia phone shorting


check shoting in nokia 5130 rm-495


1..Remove this coil mark in (1)..if u want to check the light ic N2301 is short....


2..Remove N3200 ic mark in (2) ...this is memory card driver ic .remove it to check shoting is gone or not....


3..Remove this ic n6000 mark in (3)..this is blutooth & radio ic remove it to check shoting is gone or not because this ic also got +b volt from battery....


4..Remove this ic n2100 mark in (4)..if u want to check the handfree ic because this ic also got +b volt from battery...


5..Remove this ic n1002 mark in (5)...if u want to check the pf N1002 this pf based on new tecknology... this this ic got +b from batery ic ... this ic work for network...


6..Remove ic N1001 mark in (6) ..if u want to check it ..this is rf ic based on new tecknology ...this ic got +b from batery ic ... this ic work for network...


at end remove betty and avilma ic to check shoting is gone or not........


all the component which are mark in pink colur these all are coils and resistance these are place in series and +b of batery is gone throw them so if u remove the coil and resistance u not have to remove ic to check the shorting in pcb it save time and ur ic ....





  Reply With Quote
Old 08-10-2012, 17:37   #38
RIB@T
Moderator
 
RIB@T's Avatar
 
Join Date: Aug 2010
Posts: 607
Status: Offline
Thanks: 4
Thanked 29 Times in 22 Posts
Rep Power: 9
RIB@T is on a distinguished road

answer: Solution of identify nokia phone shorting


check shoting in nokia 2700c-2....


1..Remove this coil mark in (1)..if u want to check the light ic N2301 is short....


2..Remove N3200 ic mark in (2) ...this is memory card driver ic .remove it to check shoting is gone or not....


3..Remove this ic n6000 mark in (3)..this is blutooth & radio ic remove it to check shoting is gone or not because this ic also got +b volt from battery....


4..remove this coil mark in (4) ....if u want to check the shoting cause by handfree ic ...handfree ic got the +b.....


5..Remove this ic n1002 mark in (5)...if u want to check the pf N1002 this pf based on new tecknology... this this ic got +b from batery ic ... this ic work for network...


6..Remove ic N1001 mark in (6) ..if u want to check it ..this is rf ic based on new tecknology ...this ic got +b from batery ic ... this ic work for network...


at end remove betty and avilma ic to check shoting is gone or not........


all the component which are mark in pink colur these all are coils and resistance these are place in series and +b of batery is gone throw them so if u remove the coil and resistance u not have to remove ic to check the shorting in pcb it save time and ur ic ....





  Reply With Quote
Old 08-10-2012, 17:54   #39
RIB@T
Moderator
 
RIB@T's Avatar
 
Join Date: Aug 2010
Posts: 607
Status: Offline
Thanks: 4
Thanked 29 Times in 22 Posts
Rep Power: 9
RIB@T is on a distinguished road

answer: Solution of identify nokia phone shorting


check shorting in 6300...

1..remove this coil mark in (1)...if u want to check is pf is short,.....

2..remove this coil mark in (2)..if u want to check rf ic is short because rf ic also got +b volt from battery....

3..remove this coil mark in (3)..if u want to check blutooth ic is short because bluetooth ic also got +b volt from battery....

4..remove this coil mark in (4)..if u want to check the v.camdig maker ic ..this v.camdig maker ic got +b from batery....

5..remove this coil mark in (5)..if u want to check the light ic is short....

6..also check the memory card driver ic n3200 it also got +b it can be check by only removing this ic.....

7..at end remove retu and tahvo ic...

all the component which are mark in pink colur these all are coils these are place in series and +b of batery is gone throw them so if u remove the coil u not have to remove ic to check the shorting in pcb it save time and ur ic ....

  Reply With Quote
Old 08-10-2012, 17:55   #40
RIB@T
Moderator
 
RIB@T's Avatar
 
Join Date: Aug 2010
Posts: 607
Status: Offline
Thanks: 4
Thanked 29 Times in 22 Posts
Rep Power: 9
RIB@T is on a distinguished road

answer: Solution of identify nokia phone shorting


check shoting in 5200

1..remove this coil mark in (1)...if u want to check is pf is short,.....

2..remove this coil mark in (2)..if u want to check rf ic is short because rf ic also got +b volt from battery....

3..remove this coil mark in (3)..if u want to check blutooth ic is short because bluetooth ic also got +b volt from battery....

4..remove this ic ..if u want to check the v.camdig maker ic ..this v.camdig maker ic got +b from batery....

5..remove this coil mark in (5)..if u want to check the light ic is short....

6..also check the memory card driver ic n3200 it also got +b it can be check by only removing this ic.....

7..at end remove retu and tahvo ic...

all the component which are mark in pink colur these all are coils these are place in series and +b of batery is gone throw them so if u remove the coil u not have to remove ic to check the shorting in pcb it save time and ur ic ....

  Reply With Quote
Collapse Related threads at Dhaka Mobile
Thread Thread Starter Forum Replies Last Post
Solution of identify nokia phone shorting RIB@T Nokia Hardware & Hardware-Repair Area 57 03-23-2017 22:42
china lawow t5 battery connector shorting solution need-help Chinese Models & Cloned Phones 0 11-18-2012 18:32
6300 mic shorting solution Ronymobile_care Nokia Hardware & Hardware-Repair Area 0 02-10-2012 11:47
How to Identify Component Symbols on Nokia Schematic Diagram? .:Gsmideazone:. Nokia Hardware & Hardware-Repair Area 4 02-16-2011 15:26
Nokia 5070 Dead Shorting repairing solution M.Irfan Nokia Hardware & Hardware-Repair Area 0 09-14-2010 21:12

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Resource
Service
Company
Clear Default Style - Mobile Style Clear
All times are GMT +1. The time now is 08:06.
Clear

Follow us below -

Copyright ©2010-2018. Dhaka Mobile
Registered trademark of vBulletin Solutions
An DHAKA MOBILE Company