Solution of identify nokia phone shorting - Dhaka Mobile
 
Dhaka Mobile

Go Back   Dhaka Mobile > Mobile Phone Brands -=Hardware & Software Area=- > Nokia > Nokia Base Band - (BB5)
Nokia Base Band - (BB5) Baseband-5 Phones: 2700 Classic , 2730 Classic , 3109c , 3110c , 3120c , 3250 , 3500c , 3600s , 3610 Fold , 3710 Fold , 3720 Classic , 5130 XpressM , 5200 / 5200b , 5220 XpressM , 5230 XpressM , 5300 / 5300b , 5310 / 5310b , 5320 , 5500 , 5530 XpressM , 5610 , 5630 XpressM , 5700 , 5730 XpressM , 5800 , 6085 / 6086 , 6110n , 6120c , 6121c , 6124c , 6125 , 6126 / 6133b , 6131 / 6133 , 6131 (NFC) , 6136 , 6151 , 6208 Classic , 6210n , 6212c , 6220c , 6233 , 6234 , 6260 Slide , 6263 , 6267 , 6270 , 6280 / 6288 , 6282 , 6290 , 6300 , 6300i , 6301 , 6303 Classic , 6500 Classic , 6500 Slide , 6555 , 6600 Fold , 6600 Slide , 6630 , 6650 Fold , 6680 , 6681 , 6682 , 6700 Classic , 6710 Navigator , 6720 Classic , 6730 Classic , 6760 Slide , 6790 Surge , 7210c , 7310c , 7370 , 7373 , 7390 , 7500 , 7510c , 7610c , 7900 , 8600 , 8800 arte , E50 , E51 , E52 , E55 , E60 , E61 , E61i , E62 , E63 , E65 , E66 , E70 , E71 , E72 , E75 , E90 , N70 , N71 , N72 , N73 , N75 , N76 , N77 , N78 , N79, N8, N80 , N81 , N82 , N85 , N86 , N90 , N91 , N92 , N93 , N93i , N95 , N95 8GB , N96 , N97 , N97 Mini, N770, N800, N810, N900, Asha 200, Asha 201, Asha 202, Asha 300, Asha 302, Asha 303, C2-01, C3-00, C3-01, C5-00, C5-03, C5-05, C5-06, C6-00, C6-01, C7-00, C6-01, E5-00, E6, E7-00, E50, E51, E52, E55, E60, E61, E62, E63, E65, E66, E70, E71, E72, E73, E75, E90, X1-00, T7-00, X2-00, X2-01, X5-00, X5-01, X3-00, X3-02, X6-00, X7-00,
Forums by Category
Reply
 
Thread Tools Search this Thread Display Modes
Old 08-01-2012, 11:50   #1
RIB@T
Moderator
 
RIB@T's Avatar
 
Join Date: Aug 2010
Posts: 607
Status: Offline
Thanks: 4
Thanked 29 Times in 22 Posts
Rep Power: 8
RIB@T is on a distinguished road

Solution of identify nokia phone shorting


Get started nokia mother board short solution for easy way.


check shorting in 6300...


1..remove this coil mark in (1)...if u want to check is pf is short,.....

2..remove this coil mark in (2)..if u want to check rf ic is short because rf ic also got +b volt from battery....

3..remove this coil mark in (3)..if u want to check blutooth ic is short because bluetooth ic also got +b volt from battery....

4..remove this coil mark in (4)..if u want to check the v.camdig maker ic ..this v.camdig maker ic got +b from batery....

5..remove this coil mark in (5)..if u want to check the light ic is short....

6..also check the memory card driver ic n3200 it also got +b it can be check by only removing this ic.....

7..at end remove retu and tahvo ic...

all the component which are mark in pink colur these all are coils these are place in series and +b of batery is gone throw them so if u remove the coil u not have to remove ic to check the shorting in pcb it save time and ur ic ....



  Reply With Quote
Old 08-01-2012, 13:02   #2
RIB@T
Moderator
 
RIB@T's Avatar
 
Join Date: Aug 2010
Posts: 607
Status: Offline
Thanks: 4
Thanked 29 Times in 22 Posts
Rep Power: 8
RIB@T is on a distinguished road

answer: Solution of identify nokia phone shorting


check shorting in 5200 and 5300.....

1..remove this coil mark in (1)...if u want to check is pf is short,.....

2..remove this coil mark in (2)..if u want to check rf ic is short because rf ic also got +b volt from battery....

3..remove this coil mark in (3)..if u want to check blutooth ic is short because bluetooth ic also got +b volt from battery....

4..remove this ic ..if u want to check the v.camdig maker ic ..this v.camdig maker ic got +b from batery....

5..remove this coil mark in (5)..if u want to check the light ic is short....

6..also check the memory card driver ic n3200 it also got +b it can be check by only removing this ic.....

7..at end remove retu and tahvo ic...

all the component which are mark in pink colur these all are coils these are place in series and +b of batery is gone throw them so if u remove the coil u not have to remove ic to check the shorting in pcb it save time and ur ic ....


  Reply With Quote
Old 08-01-2012, 13:12   #3
RIB@T
Moderator
 
RIB@T's Avatar
 
Join Date: Aug 2010
Posts: 607
Status: Offline
Thanks: 4
Thanked 29 Times in 22 Posts
Rep Power: 8
RIB@T is on a distinguished road

answer: Solution of identify nokia phone shorting


check shorting in 5310..

1..remove this coil mark in (1)...if u want to check is light ic is short,.....

2..remove this coil mark in (2)..if u want to check ringer ic is short because rf ic also got +b volt from battery....

3..remove this coil mark in (3)..if u want to check audio amplifier voltage maker ic n2101 is short because bluetooth ic also got +b volt from battery....

4..remove this rf ic mark in (4)..if u want to check the shorting is remove because rf ic got +b from batery. it can be check only by removing this ic

5..remove this ic mark in (5)..if u want to check the shorting is removed..this ic also got +b it can be check only by removing this ic .

6..also check the blue tooth ic because it also got +b from batery it can be check only by removing this ic

7..at end remove avilma and betty ic...

all the component which are mark in pink colur these all are coils these are place in series and +b of batery is gone throw them so if u remove the coil u not have to remove ic to check the shorting in pcb it save time and ur ic ....

  Reply With Quote
Old 08-01-2012, 14:45   #4
RIB@T
Moderator
 
RIB@T's Avatar
 
Join Date: Aug 2010
Posts: 607
Status: Offline
Thanks: 4
Thanked 29 Times in 22 Posts
Rep Power: 8
RIB@T is on a distinguished road

answer: Solution of identify nokia phone shorting


check shorting in 3500....and 3110...

1..remove this coil mark in (1)...if u want to check is pf is short,.....

2..remove this coil mark in (2)..if u want to check rf ic is short because rf ic also got +b volt from battery....

3..remove this coil mark in (3)..if u want to check blutooth ic is short because bluetooth ic also got +b volt from battery....

4..remove this coil mark in (4)..if u want to check the v.camdig maker ic ..this v.camdig maker ic got +b from batery....

5..remove this coil mark in (5)..if u want to check the light ic is short....

6..also check the memory card driver ic n3200 it also got +b it can be check by only removing this ic.....

7..at end remove retu and tahvo ic ..

all the component which are mark in pink colur these all are coils these are place in series and +b of batery is gone throw them so if u remove the coil u not have to remove ic to check the shorting in pcb it save time and ur ic ....

  Reply With Quote
Old 08-01-2012, 16:13   #5
RIB@T
Moderator
 
RIB@T's Avatar
 
Join Date: Aug 2010
Posts: 607
Status: Offline
Thanks: 4
Thanked 29 Times in 22 Posts
Rep Power: 8
RIB@T is on a distinguished road

answer: Solution of identify nokia phone shorting


check shoring in nokia 6111...


1..remove this coil mark in (1)...if u want to check is pf is short,.....

2..remove this coil mark in (2)..if u want to check the light ic is short....

3..remove this coil mark in (3)..if u want to check flash light driver ic is short because flash light driver ic also got +b volt from battery....

4..remove this boot ic mark in (4)..if u want to check the shorting is made by boot ic .....it is often damage in water damage set ....replace ith new one if it cause shorting......

5..remove this n2371 mark in (5)..if u want to check the v.camdig maker ic which make v camdig for camera ...it also got +b from batery.....

6.. check the n2370r ic ...it make vcorea suplyy for cpu ... it also got +b it can be check by only removing this ic.....

7..remove ringer ic mark in (7) to check shorting is gone or not...

8..remove bluetooth ic to check shoting is gone mark in (8)......

9..remove uem to check shorting......


all the component which are mark in pink colur these all are coils these are place in series and +b of batery is gone throw them so if u remove the coil u not have to remove ic to check the shorting in pcb it save time and ur ic ....

  Reply With Quote
Old 08-10-2012, 13:30   #6
RIB@T
Moderator
 
RIB@T's Avatar
 
Join Date: Aug 2010
Posts: 607
Status: Offline
Thanks: 4
Thanked 29 Times in 22 Posts
Rep Power: 8
RIB@T is on a distinguished road

answer: Solution of identify nokia phone shorting


check shorting in nokia dct4++ 2630.....


1..remove the pf n7700 mark in (1)...if u want to check is pf is short remove it and check shoting...if it is shot then replace it...

2..remove this coil mark in (2)..if u want to check the light ic is short....

3..remove ringer ic mark in (3)..if u want to check shoting remove it and check if shoting is gone replace it because ringer ic also got +b volt from battery....

4..remove this v.camdig ic n3301 mark in (4)..if u want to check the v.camdig maker ic ..this v.camdig maker ic got +b from batery....to make v,cam for camera.....

5..remove this ic n6000 bluetooth and fm ic mark in (5)..if u want to check the shoting cause by it remove it and check shoting because it got =b from batery....

6..at end check the power ic and reemove it to check shoting is there or not...

all the component which are mark in pink colur these all are coils these are place in series and +b of batery is gone throw them so if u remove the coil u not have to remove ic to check the shorting in pcb it save time and ur ic ....

  Reply With Quote
Old 08-10-2012, 13:33   #7
RIB@T
Moderator
 
RIB@T's Avatar
 
Join Date: Aug 2010
Posts: 607
Status: Offline
Thanks: 4
Thanked 29 Times in 22 Posts
Rep Power: 8
RIB@T is on a distinguished road

answer: Solution of identify nokia phone shorting


check shorting in nokia n-70...


1..remove this z7500 mark in (1) if u want to check the shoting of pf of gsm and wcdma ....if remove the coil and ur shoting is gone then tere is shoting in ur pf of gsm or wcdma ........

2..remove this coil mark in l7503 (2)...if u want to check the shoting of rf ic for gsm hinku and rf ic for wcdma vinku.... by removing this coil if ur shoting is gone then there is shoting in ur rf ic whether it is hinku or vinku....

3..remove this coil mark in (3)..if u want to check the shoring cause flash light driver ic n1471 ....because this ic got +b from batery....

4..remove this coil mark in (4)..if u want to check smps ic n4200.. ..this ic make v corea for omap ic and rap remove cil to check shoting is gone or not.....

5..remove this ic n4201 ape regulator mark in (5)..if u want to check the shoting is cause by this remove it to check shoting is gone or not....

6..remove light ic mark in (6) ... to check the shoting cause by light ic or not....

7..remove n1472 ic mark in (7) ...it is vcamdig maker ic which make v.cam when front camera is activated ......remove this to check shoting because this ic got +b from batery......

8..remove ic n1470 and n7505 ic mark in (8,9)... it is c camdig maker ic which make v.cam or front camera ....remove these ic to check shoting .....because it got +b from batery.....

9..remove bluetooth module mark in (10)... tocheck shoting ...because it got +b from batery.....

10..at end remove retu and tahvo ic to check shoting.......

all the component which are mark in pink colur these all are coils these are place in series and +b of batery is gone throw them so if u remove the coil u not have to remove ic to check the shorting in pcb it save time and ur ic ....

  Reply With Quote
Old 08-10-2012, 13:34   #8
RIB@T
Moderator
 
RIB@T's Avatar
 
Join Date: Aug 2010
Posts: 607
Status: Offline
Thanks: 4
Thanked 29 Times in 22 Posts
Rep Power: 8
RIB@T is on a distinguished road

answer: Solution of identify nokia phone shorting


check shorting in nokia 6630....


1..1..remove this coil z7500 mark in (1) if u want to check the shoting of pf of gsm and wcdma ....if remove the coil and ur shoting is gone then tere is shoting in ur pf of gsm or wcdma ........

2..remove this coil mark in l7503 (2)...if u want to check the shoting of rf ic for gsm hinku and rf ic for wcdma vinku.... by removing this coil if ur shoting is gone then there is shoting in ur rf ic whether it is hinku or vinku....

3..remove this coil mark in (3)..if u want to check smps ic n4200.. ..this ic make v corea for omap ic and rap remove cil to check shoting is gone or not.....

4..remove light ic mark in (4) ... to check the shoting cause by light ic or not....


5..remove n1470 ic mark in (7) ...it is vcamdig maker ic which make v.cam when front camera is activated ......remove this to check shoting because this ic got +b from batery......

6..remove n6031 ic mark in (6)... it is vreg maker ic for bluetooth module .....remove it and check shoting if ur shoting is then replace it.. this ic got +b from batery....

7..at end remove retu and tahvo ic to check shoting is gone or not....


all the component which are mark in pink colur these all are coils these are place in series and +b of batery is gone throw them so if u remove the coil u not have to remove ic to check the shorting in pcb it save time and ur ic ....

  Reply With Quote
Old 08-10-2012, 13:37   #9
RIB@T
Moderator
 
RIB@T's Avatar
 
Join Date: Aug 2010
Posts: 607
Status: Offline
Thanks: 4
Thanked 29 Times in 22 Posts
Rep Power: 8
RIB@T is on a distinguished road

answer: Solution of identify nokia phone shorting


check shoting in 6070,6080,5070,6020....

1..1..remove the coil mark in (1)...if u want to check is pf is short remove it and check shoting...if it is shot then replace it...

2..remove this coil mark in (2)..if u want to check the light ic is short....

3..remove the resistance mark in (3) ..if u want to check irda module ... because irda module got +b from batery....

4..remove this v.camdig ic n1470 mark in (4)..if u want to check the v.camdig maker ic ..this v.camdig maker ic got +b from batery....to make v,cam for camera.....



5..at end check the power ic and reemove it to check shoting is there or not...

all the component which are mark in pink colur these all are coils these are place in series and +b of batery is gone throw them so if u remove the coil u not have to remove ic to check the shorting in pcb it save time and ur ic ....

  Reply With Quote
Old 08-10-2012, 14:12   #10
RIB@T
Moderator
 
RIB@T's Avatar
 
Join Date: Aug 2010
Posts: 607
Status: Offline
Thanks: 4
Thanked 29 Times in 22 Posts
Rep Power: 8
RIB@T is on a distinguished road

answer: Solution of identify nokia phone shorting


check shoting in nokia 1650,1200,1208......


1..remove this coil mark in (1)..if u want to check the light ic is short....


2..remove ringer ic mark in (2)..if u want to check shoting remove it and check if shoting is gone replace it because ringer ic also got +b volt from battery....

3..remove the network ic n7100 mark in (1)...if u want to check this ic is short remove it and check shoting...if it is shot then replace it...

4..at end check the power ic d2901 mark in (4) and reemove it to check shoting is there or not...

all the component which are mark in pink colur these all are coils these are place in series and +b of batery is gone throw them so if u remove the coil u not have to remove ic to check the shorting in pcb it save time and ur ic ....

  Reply With Quote
Collapse Related threads at Dhaka Mobile
Thread Thread Starter Forum Replies Last Post
Solution of identify nokia phone shorting RIB@T Nokia Hardware & Hardware-Repair Area 57 03-23-2017 22:42
china lawow t5 battery connector shorting solution need-help Chinese Models & Cloned Phones 0 11-18-2012 18:32
6300 mic shorting solution Ronymobile_care Nokia Hardware & Hardware-Repair Area 0 02-10-2012 11:47
How to Identify Component Symbols on Nokia Schematic Diagram? .:Gsmideazone:. Nokia Hardware & Hardware-Repair Area 4 02-16-2011 15:26
Nokia 5070 Dead Shorting repairing solution M.Irfan Nokia Hardware & Hardware-Repair Area 0 09-14-2010 21:12

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Resource
Service
Company
Clear Default Style - Mobile Style Clear
All times are GMT +1. The time now is 05:13.
Clear

Follow us below -

Copyright ©2010-2017. Dhaka Mobile
Registered trademark of vBulletin Solutions
An DHAKA MOBILE Company