How To Make China Phone Flash Cable See here - Dhaka Mobile
 
Dhaka Mobile

Go Back   Dhaka Mobile > Mobile Phone Brands -=Hardware & Software Area=- > Chinese Models & Cloned Phones
Chinese Models & Cloned Phones All China Phone Platforms like (MTK, Spreadtrum.. etc.) Cloned Nokia Nokla & Motorola . etc. Phones are included!
Forums by Category
Reply
 
Thread Tools Search this Thread Display Modes
Old 01-14-2011, 12:32   #1
GSM PATTOKI
Senior Member
 
Join Date: Sep 2010
Posts: 346
Status: Offline
Thanks: 0
Thanked 8 Times in 8 Posts
Rep Power: 8
GSM PATTOKI is on a distinguished road

How To Make China Phone Flash Cable See here


How To Make China Phone Flash Cable See here.

Many of new member face the problem, how they make a usb to com cable for flash his china phone. with this usb to com cable any one can use free soft for do software operation on his phone.


with a usb to com cable (as like ringtone cable) you can make your own cable for flashing, format, ect for china phone.

i explain here with a Motorola c261 usb ringtone cable, its always do better work for me.

first collect a cable of Motorola c261 usb ringtone cable (available in market) like this-





in cable middle have intact a box by plastic. in it have a mini pcb. need to open this
mini box for see and work on it. see picture-




after open it, now we see a mini pcb, its one side have 5 cable, which is connect to pc usb, no need to touch it. its ok.

we work on pcb opposite cable connection, here have 3 cable. 1 tx, 1rx, 1gnd. see pic-






here have 3 cable, now make a connection for V+ or B+. when we flashing our phone we need power supply for flash phone. so connect a cable with clip in this point, just use a diod from pc usb V+, see picture-




for cable driver, use it motorola usb to com cable drive or you can use PL2303 USB driver.

connect cable tx rx gnd B+ to phone tx rx gnd B+ and work your phone. now we found our won cable for flashing china phone.

for expert user : now you can collect a RJ45 connector. than join tx rx gnd in in RJ45 Socket. now you use any rj45 cable with it. and place it on any box, as like in any reject device, open box and leave it old pcb than place this pcb in it. and V+/B+ cable and clip stay in out or side for give power supply to phone. now you found a complete china box/device and use it.


Br,
GSM PATTOKI

  Reply With Quote
Old 11-26-2011, 03:54   #2
Hong Dubourg
Suspended
 
Join Date: Nov 2011
Posts: 13
Status: Offline
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
Hong Dubourg is on a distinguished road

answer: How To Make China Phone Flash Cable See here


It's very kind of you to share it .
It's more important for some people.
well done!
  Reply With Quote
Collapse Related threads at Dhaka Mobile
Thread Thread Starter Forum Replies Last Post
modified for china phone cable using cable ufc king.of.gsm SpiderMan 2 06-06-2017 00:48
china any dual SIM mobile phone imei change without any box only with data cable tested by me 1000% ...::GSM420::... Chinese Models & Cloned Phones 7 06-06-2017 00:47
Flash China Phone By HWK ameenudeen Nokia Hardware & Hardware-Repair Area 3 10-23-2012 01:37
Flash China Phone By HWK ameenudeen Nokia Hardware & Hardware-Repair Area 2 10-22-2012 11:48

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Resource
Service
Company
Clear Default Style - Mobile Style Clear
All times are GMT +1. The time now is 09:31.
Clear

Follow us below -

Copyright ©2010-2017. Dhaka Mobile
Registered trademark of vBulletin Solutions
An DHAKA MOBILE Company