Thread: .::your MT BOX problem post here::.

Reply to Thread
  1. #1
    No Life Poster ranksranksranksranksranksranks
    Join Date: Nov 2010 Member: 3054 Status: Offline Posts: 1,461
    Thanks Meter: 14

    .::your MT BOX problem post here::.


    your MT BOX problem post here

  2. #2
    No Life Poster ranksranksranksranksranksranks
    Join Date: Nov 2010 Member: 3054 Status: Offline Posts: 1,461
    Thanks Meter: 14

    what it means to check the first and last pin on MT-BOX

    what it means to check the first and last pin on MT-BOX



    The most common causes of lack of communication with the Nokia BB5 is damaged UTP connector which consists of 10 pins.
    Frequently by inserting cables 8-pins or other non-10-pins. (pic.1)


    If your phone doesn't communicate with the program and isn't damaged or loaders are in the wrong folder or internal cable fault (resistance on BSI line), then we say that you need to check first and last pin - in this FAQ I will show you a quick demonstration how to change a new one. (pic.2)



    WARNING! If you take yourself to exchange the item will automatically lose the guarantee on the unit
    - remember you need to know basic soldering guide (pic.3)


    After sucessfully removing old UTP slot (pic.3) clean carefully soldering field (pic.4)


    When you insert a new connector then can enjoy the action of your MT-Box device


    Good Luck !

  3. #3
    No Life Poster ranksranksranksranksranksranks
    Join Date: Nov 2010 Member: 3054 Status: Offline Posts: 1,461
    Thanks Meter: 14

    MT box - Open way, Electrical scheme and PCB pictures

    Maybe this will help if someone break some tracks or need to repair their box.









    MT Box electrical scheme: download form [Only registered & active users can see links.] Register or Log In

Reply to Thread
Share with