credits go to Ahmed-GsM

Exe version: NCKBox AndroidMTK 2.6

Selected model: Lenovo A2010a

Action: Reset Pattern

Reinsert phone battery.

Battery must be charged.

Phone must be off with battery inside.

Please insert USB cable now...

Detected : MediaTek PreLoader USB VCOM (Android) (COM4)

Boot mode: Preloader

BBCHIP: 335 0 ca00

Using Algo 2.

Phone detected...Please wait

Sending DA agent, please wait...

----------------------------------------------------

BaseBand CPU :MT6735M

BaseBand CPU Secure Version : FF

BaseBand CPU Bootloader Version : 01

----------------------------------------------------

INT RAM: 128 KB SDRAM

EXT RAM: 1 GB DRAM

----------------------------------------------------

EMMC: (58Gb+8192Mb) SAMSUNG 0x463732324d42

EMMC FW VERSION: 00:00:00:00:00:00:00:00

EMMC CID: 150100463732324D42 : 00000000000000

EMMC UA SIZE: 0x1d2000000

BOOT STYLE: EMMC BOOT

FULL LENGTH: 0x1d2880000 [7.290 GB]

Status: USB_HIGH_SPEED

Detecting high speed port, wait......

If driver not installed, install high speed port driver.

If not need high speed port, disable it.

After repeat opperation.

Detected : MediaTek DA USB VCOM (Android) (COM8)

[1]locksettings.db erased ok

[1]locksettings.db-wal erased ok

[1]locksettings.db-shm erased ok

[1]gesture.key erased ok

[1]password.key erased ok

If phone remain on logo, repower phone again.

If lock remain, perform 2 times reset without power on phone.

Wait untill phone will start charging.

[0]All done.

Sent from my CPH1717 using Tapatalk