Thread: I9000 (Galaxy S , I9008 in China ) Discussion Thread ,

Reply to Thread
  1. #1
    Banned ranksranksranksranksranksranksranks
    Join Date: Feb 2011 Member: 36685 Status: Offline Posts: 1,837
    Thanks Meter: 6

    I9000 (Galaxy S , I9008 in China ) Discussion Thread ,


    The Samsung Galaxy S

    Android smartphone that was announced by Samsung in March 2010. It features a 1 GHz ARM "Hummingbird" processor, 8–16 GB internal flash memory, a 4 inches (10 centimetres) 480×800 pixel Super AMOLED capacitive touchscreen display, Wi-Fi connectivity, a 5-megapixel camera with a maximum resolution of 2560x1920 and, on select models, a front-facing 0.3 MP VGA camera (640x480).[4][5] The base version of the phone, the GT-I9000, was specialized for each of the U.S. carriers, and released as the Epic 4G, Vibrant, Captivate, Fascinate, and Mesmerize. The name "Galaxy S" is used today for various models of Samsung phones that are quite different from the original Galaxy S, such as the Galaxy S Blaze, Galaxy S Aviator, or Samsung Galaxy S Relay 4G. These are akin to spin-offs, rather than phones in the main "Galaxy S" series.

    [IMG]http://www.*********.com/i9000_pic.jpg[/IMG]

    Feature and Specifications

    [IMG]http://www.*********.com/i9000_car.jpg[/IMG]


    Latest Firmware
    Repease Date 2012 November 2.3.6
    [Only registered & active users can see links.] Register or Log In

    Technical Manual
    Available [Only registered & active users can see links.] Register or Log In

  2. #2
    Banned ranksranksranksranksranksranksranks
    Join Date: Feb 2011 Member: 36685 Status: Offline Posts: 1,837
    Thanks Meter: 6
    Disclaimer:

    I cannot guarantee that this process will work for you as it did for me. If something goes wrong I will do everything I can to help you, but you are responsible. This is a guide for the I9000 international version.


    What you need (All links are direct download):

    Firmware you wish to flash. Generally find them [Only registered & active users can see links.] Register or Log In
    Odin3 v1.85 (Contained in the firmware)
    USB Cable
    Backups
    Ability to get into download mode ( Vol Down + Home + Power On or Download Mode Adapter )

    Backup ,


    • SMS using "GO sms", "SMS backup and Restore" or "SMS Backup +"(syncs with Gmail).
    • Contacts using "GO contacts" or other preferred app.
    • APN using "APN Backup & Restore" (internal SD save, handles duplicates)
    • Call logs using "Call Logs Backup & Restore" (internal SD save)
      [*}Bookmarks using "Backup Bookmarks"

    These will all be saved onto the internal SD card which WON'T be wiped during the update process. If you wish to backup your SD card as well, then be my guest.

    Up******



    phone should be in download mode, but have it unplugged from the computer. Extract the firmware and run Odin3,


    In odin, there is a lot you don't really need to worry about. Just make sure that Re-Partition, Auto Reboot and F. Reset Time ARE ticked.

    Click the button that says PIT, navigate to the folder you unzipped the firmware into, select the PIT file. Press the PDA button and select the CODE file. Press the PHONE button and select the MODEM file. Press the CSC button and select the CSC file.

    Now (in download mode) plug in your phone. It may take some time for the phone to register with the computer and it may fail. If that's the case then see Appendix: USB Drivers.

    Odin should now look like this with the yellow COM representing your phone connected.





    Installing

    Be extremely careful while Odin is flashing your device. . Once your phone is connected properly and odin is prepared, hit install. This should take around 2-10 minutes depending on your computer etc. Once done, the phone should reboot and voila you now have gingerbread.

    Any Question u can Ask here

    Also here some More Guides Link U can look Here if This Not Help U
    [Only registered & active users can see links.] Register or Log In

Reply to Thread
Share with