Thread: KYOCERA

Reply to Thread
  1. #1
    No Life Poster ranksranksranksranksranks
    Join Date: Sep 2010 Member: 30 Status: Offline Posts: 889
    Thanks Meter: 14

    KYOCERA


    KYOCERA

    Qualcomm qcp-800 Nam Pogramming :
    Nam Set: Menu+3+0+Spc
    Field Test: Menu+7+0+Fsc
    Kyocera 1135, 2255, 3035, 5135, 6035, Se47, etc Nam Programming :
    Nam Set: 111111+Jog Dial(Ok), Select "Programming"+Spc
    CAI Change: ##7738,ok
    Enable TTY: ##889,ok
    Life Timer, PRL, etc: ##786,ok
    A-key: ##2539,ok
    A-key: 2539,ok
    Tips:
    On some kyocera handsets the factory service module has not been disabled
    and the phone can be programmed without the spc by inputting.
    Nam Set: ##333333 menu (service)

  2. #2
    No Life Poster ranksranksranksranksranks
    Join Date: Sep 2010 Member: 30 Status: Offline Posts: 889
    Thanks Meter: 14

    SANYO

    SANYO

    Sanyo 4900, 5150, 5300, 8100, etc Nam Programming :
    Nam Set: ##Spc+Ok+Key Down+Ok
    Advanced Setup: ##3282+Ok+Key Down+Ok+Msl
    A-key: ##2539+Ok+Key Down+Ok
    Version: ##**837+Ok+Key Down+Ok
    Debug Menu: ##FSC+Ok+Key Down+Ok
    Airtime menu: ##8463+Ok+Key Down+Ok
    Change CAI: ##7738+Ok+Key Down+Ok
    Vocoder: ##8626337+Ok+Key Down+Ok
    Reverse Logistic: ##786+Ok+Key Down+Ok
    Set IP Address: ##2769737+Ok+Key Down+Ok
    TTY On/Off: ##889+Ok+Key Down+Ok
    Ready Link: ##4636+Ok+Key Down+Ok
    Browser Init On/Off: ##4682+Ok+Key Down+Ok
    Picture Token: ##25327+Ok+Key Down+Ok
    Unknown Code: ##5282277+Ok+Key Down+Ok
    (SPC=000000, FSC=040793)
    Sanyo scp-A011, smp-A017, etc Nam Programming :
    Nam Set: F9(3 beep) + 0*72696#767

  3. #3
    No Life Poster ranksranksranksranksranks
    Join Date: Sep 2010 Member: 30 Status: Offline Posts: 889
    Thanks Meter: 14

    NOKIA

    NOKIA

    Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280, etc Nam Programming :
    Nam Set: *3001#12345#
    Software Version: *#837#
    Software Version: *#9999#
    Esn Number: *#92772689#
    Restart Phone: *#75681#
    Restart Phone: *#75682#
    Nokia 8887 Nam Programming :
    Nam Set: *3001#12345#
    Version: *#0000#
    Evrc: *#8378#
    Esn/Data/Timer: *#92772689#
    SID: *#743#
    Nokia 8587 Nam Programming :
    Nam Set: *#626#7764726#
    A-Key: #8159357022#4579# (26 digits)
    A-Key: #8159357022#4547# (20 digits)
    Version: *#0000#
    Version: *#837#
    Vocoder: *#3872#
    Change language: Menu 5, 3, 1
    Change DM mode: *#7678#
    Debug Screen: *#8378#
    Debug: *#8380#
    Field Test Menu: *#83788#
    SPC Unlock, Factory Reset :
    Full Factory Reset: *#7370#
    Resets all settings including non-user changeable items (like SPC)

  4. #4
    No Life Poster ranksranksranksranksranks
    Join Date: Sep 2010 Member: 30 Status: Offline Posts: 889
    Thanks Meter: 14

    NOKIA TEST MODE:

    NOKIA TEST MODE:
    51xx, 61xx, 71xx, 3285, 63xx, etc :
    1) Turn on the phone. Press *3001#12345#
    2) Scroll up to where it says "Field Test" and choose SELECT
    3) Highlight "Enable" and choose OK. Turn the phone off then back on.
    4) If the test mode screen does not show up press MENU and scroll
    down to "Field Test" choose SELECT. Press 0 1 then choose OK.
    5) Lower left or upper left number is the signal strength.
    6) To turn off the test mode press MENU and scroll down to where it says
    "Field Test" choose SELECT. Press 0 0 and then choose OK.
    3360, 6360 :
    1) Turn on the phone. Press *3001#12345#
    2) Scroll up to where it says "Field Test" and choose SELECT
    3) Highlight "Enable" and choose OK. Turn the phone off then back on.
    4) If the test mode screen does not show up press MENU and scroll
    down to "Field Test" choose SELECT. Press 2 1 0 1 then choose OK.
    5) Lower left or upper left number is the signal strength.
    6) To turn off the test mode press MENU and scroll down to where it says
    "Field Test" choose SELECT. Press 2 1 0 0 and then choose OK.

  5. #5
    No Life Poster ranksranksranksranksranks
    Join Date: Sep 2010 Member: 30 Status: Offline Posts: 889
    Thanks Meter: 14

    AUDIOVOX

    AUDIOVOX

    Audiovox 4000, 9000, 9100, 9155, 9500, etc Nam Programming :
    (Power the phone on and wait until the little light on top goes out)
    Nam Set: 289+fcn+#+1
    Service menu: fcn+00+fsc(000000)
    Test Mode: Hold (2,*,Rcl)+Power
    Test Mode Commands:
    99 - download - flash phone
    124 - inam data write
    125 - version
    126 - esn read
    127 - sec_code
    128 - lock_code
    129 - is WFTV data write
    137 - FSC code
    138 - NPcode (nam program code)
    139 - dscode
    141 - restart
    218 - Read_Addr
    000 - is cdma mode
    001 - is fm mode
    002 - is pcs mode
    008 - is reg read addr
    020 - is lna_range
    Audiovox pcx-3500xl Nam Programming :
    Nam Set: ##2726+Send+1998+1+Spc+1
    Audiovox cdm-100, 130, 135, 8300, 8500, 8600, etc Nam Programming :
    Nam Set: ##20022002+Pwr+1+Spc
    Audiovox 8610, 8910, etc Nam programming :
    Name Set: ##847446, end, 111111
    Audiovox-107 Nam Programming :
    Nam Set: 45680*47*869#1
    Audiovox CMP-3 Nam Programming :
    Nam Set: 45680*47*869#1
    Dm Mode: Menu, 6, 6
    Audiovox 9950 Nam Programming :
    Nam Set: ##3282
    Audiovox Z800 (Audiovox 7900, Sharp) Nam Programming :
    Nam Set: m + # + envelope key + * + 1
    Audiovox Thera (Toshiba 2032) Nam Programming :
    Thera Nam Programming User Manual - nam_thera.pdf
    AUDIOVOX TEST MODE :
    9100, 9155:
    1) Turn on the phone. As soon the phone comes on and the green light
    turns off press RIGHTARROW, 0, 0. The phone will ask for the
    "FSC Code", press 000000 then choose OK and press RIGHTARROW,
    RIGHTARROW. Your phone is now in test mode.
    2) The signal strength is the number on the top right hand side of the screen.
    3) To turn off test mode shut of the phone and then turn it back on.

Reply to Thread
Share with