Thread: atf box init failed need help

Reply to Thread
  1. #1
    Newbie
    Join Date: Mar 2014 Member: 301017 Status: Offline Posts: 3
    Thanks Meter: 0

    Exclamation atf box init failed need help


    i need some help how to solve this problem

    [Only registered & active users can see links.] Register or Log In

  2. #2
    Newbie
    Join Date: Mar 2014 Member: 301017 Status: Offline Posts: 3
    Thanks Meter: 0
    her is the pic

    [Only registered & active users can see links.] Register or Log In

  3. #3
    Product Manager
    Join Date: Oct 2011 Member: 186175 Status: Offline Posts: 4,163
    Thanks Meter: 328
    1. Make sure NO OTHER BOXES ARE CONNECTED TO USB PORT

    2. Make sure ONLY 1 ATF BOX IS CONNECTED TO USB PORT

    3. Go to "Product Support" ---> "Box Tools" ---> click "Restore EEPROM"


    4. Disconnect ATF Box from USB Port

    5. Close ATF Software (AdvanceBox.exe)

    6. Connect ATF Box to USB Port

    7. Run ATF Software (AdvanceBox.exe)

    8. Wait until USB Drivers are installed... Then close ATF Software


    9. DO NOT ACTIVATE JTAG USING ATF Software!!!



    *** Make sure you Internet Connection before proceeding to the Next Step...


    10. Run ATFJ.exe (ATF JTAG Software 1.06 or higher...)




    If your problem is still not solved, read Step 9... Repeat 1 to 10 again.

    BR,
    RIZWANKHAN8670

    Please reply here, if you have any question about this thread!

Reply to Thread
Share with