KesortD

Well-known member
Joined
Mar 24, 2019
Posts
1,521
Likes
20

Reputation:

Operation : Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM4)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1407B00 [8974] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E
Initializing Protocol...OK
Sending Loader [prog_emmc_firehose_8974.mbn]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8974, eMMC, ERASED GPT
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 131072, Sector Size: 512
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sdi.mbn] -> [dbi] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [tz.mbn] -> [tz] ...Done
[PROTECTIVE_FLASH] Skipping [modemst.bin] -> [modemst1]
[PROTECTIVE_FLASH] Skipping [modemst.bin] -> [modemst2]
[PROTECTIVE_FLASH] Skipping [dynamic_nvbk.bin] -> [oppodycnvbk]
[PROTECTIVE_FLASH] Skipping [static_nvbk.bin] -> [oppostanvbk]
Writing [system.img ] -> [system]...Done
Writing [persist.img ] -> [persist]...Done
Writing [cache.img ] -> [cache]...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [logo.bin] -> [LOGO] ...Done
Writing [DRIVER.ISO] -> [DRIVER] ...Done
Writing [reserve4.img ] -> [reserve4]...Done
Writing [userdata.img ] -> [userdata]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.
QcFire Ver. 5.6
 
Prev Thread | Next Thread
Top